๐Ÿ“– Contents ๐Ÿฆ  Hub ๐Ÿ”ฌ Interactive Lab Chapter 9 ยท Antimicrobial Drugs
Microbiology · Chapter 9

Antimicrobial Drugs

Few discoveries have saved more lives than the antibiotic. Inside a single lifetime, infections that once emptied hospital wards became curable. Pneumonia. Sepsis. A wound gone bad. That victory rests on one neat idea. A bacterium is built differently from you. A well-chosen drug can use that difference to kill the microbe and leave the sick person unharmed. This chapter shows how antimicrobials work. It shows how the right one gets picked. And it shows why bacteria are fighting back. Along the way you will see that the drugs only keep working if people handle them well. When cultures get drawn, whether a dose lands on time, how long a course runs: these small choices decide whether the whole enterprise still works for the next person who needs it.

By the end of this chapter you can

  • Explain selective toxicity and why it makes antimicrobial therapy possible.
  • Define the therapeutic index. Then link a narrow index to the need for drug-level monitoring.
  • Name the five bacterial targets that antibacterial drugs attack, and give a drug class for each.
  • Tell bactericidal from bacteriostatic, and narrow- from broad-spectrum drugs.
  • Describe how susceptibility testing guides drug choice. That means the MIC, Kirby–Bauer, and the Etest.
  • Sum up the four main resistance mechanisms, and say how resistance genes spread.
  • Explain what MRSA is and why it matters at the bedside.
  • State the goals of antibiotic stewardship and the bedside actions that carry it out.

Section 1What makes a good antimicrobial

Graph of drug plasma concentration over time relative to the therapeutic range
Reference. A drug's plasma concentration must stay above the level that works but below the level that harms — the therapeutic window. OpenStax Microbiology, CC BY 4.0 (via Wikimedia Commons)

Selective toxicity: hurt the microbe, spare the host

A drug that kills bacteria is a poison. We put it into a sick person and call it medicine. One idea is what makes that safe. It is called selective toxicity. A good antimicrobial harms the microbe far more than it harms the host. This works because a bacterium is a prokaryote. It is built from parts your own cells simply do not have. It wraps itself in a stiff cell wall made of peptidoglycan. Your cells have no wall at all. Its ribosomes are the machines that build proteins. They are a different size and shape from yours. It also makes its own folic acid from scratch, while you get folate from food. Each of those gaps is a handle a drug can grab. Aim at a part the microbe has and the host lacks. You get a cure with little damage on the side.

Selective toxicity is a matter of degree. It is never perfect. The widest safety margins belong to the drugs that attack the cell wall. Those are the penicillins and the cephalosporins. Human cells own no wall for them to injure. Drugs that hit something bacteria and humans share are riskier. An aminoglycoside can damage the kidney and the inner ear. An antifungal that aims at the fungal cell membrane can disturb human membranes too. Both kinds of membrane are built around sterols. So the closer a microbe sits to us in biology, the harder selective toxicity gets. A fungus is close. A protozoan is close. A human cell hijacked by a virus is closer still. That is exactly why antibacterial drugs are gentler than most antifungals and antivirals.

The therapeutic index: how much room for error

Every drug has a dose that helps. It also has a higher dose that harms. The therapeutic index puts a number on the gap between them. Roughly, it is the toxic dose divided by the effective dose. A large index means a comfortable margin. You would have to overshoot badly before anyone got hurt. That is why penicillin can be given in generous doses with little worry. A small index is called a narrow therapeutic index. Now the helpful dose and the harmful dose sit uncomfortably close. Such a drug has to be dosed with care. Often its level is measured right in the blood.

The graph above is where that idea becomes a bedside tool. The goal is to hold the drug inside the therapeutic window. High enough to kill bacteria. Low enough to spare the host. Two antimicrobials sit at the narrow end of the scale. One is vancomycin. The others are the aminoglycosides, such as gentamicin and tobramycin. With these drugs we do not guess. We draw blood levels. A trough is drawn just before the next dose. It proves the drug has not piled up to a toxic level. Sometimes a peak is drawn as well. It proves the level climbed high enough to work.

DrugTherapeutic indexWhat that means in care
PenicillinsWideLarge safety margin; routine levels not needed
CephalosporinsWideWell tolerated; watch for allergy, not toxicity
VancomycinNarrowMonitor trough levels; watch kidney function
AminoglycosidesNarrowMonitor peak & trough; risk of kidney & ear toxicity
A drug level is only as good as its timing. A vancomycin trough has to be drawn right before the next dose. Not an hour early. Not after the bag has run in. Draw it at the wrong moment and the number means nothing. The next dose then gets set from a bad value. The person is either under-treated or pushed toward kidney injury. For a narrow-index drug, the clock is part of the therapy.
Interactive Slide the dose of four drugs through the window, watch the kill and the toxicity rise, then run a dose over time and draw a trough Open full ↑
Key points
  • Selective toxicity means hitting a target the microbe has and the host lacks. It is what makes antimicrobial therapy possible.
  • The beta-lactams, meaning penicillins and cephalosporins, are the safest drugs. Human cells have no wall to injure. But vancomycin also aims at the wall, and it is still hard on the kidney and narrow-index. Target alone does not promise safety.
  • The therapeutic index is the gap between the helpful dose and the harmful one.
  • Narrow-index drugs need blood-level monitoring. That means vancomycin and the aminoglycosides. The timing of the draw is everything.

Section 2How the drugs work

Diagram of the modes of action of antibacterial drugs against a bacterial cell
Reference. The modes of action of antibacterial drugs — each class attacks a different bacterial structure. OpenStax Microbiology, CC BY 4.0 (via Wikimedia Commons)

Five ways to kill a bacterium

Antibacterial drugs come in great variety. Yet they attack a bacterium in only a handful of places. Learn these five targets and almost any antibiotic you meet drops into a mental map. Better still, the map predicts two things. It predicts how selective the drug is. It also predicts the side effects you should watch for.

1. Cell wall synthesis. The peptidoglycan wall is the pressure vessel of the cell. Without it the cell bursts. Penicillins, cephalosporins, and vancomycin block the building of that wall. Growing bacteria then split open and die. Human cells have no wall, so this is the most selective target of all. The penicillin and cephalosporin families share a chemical ring called a beta-lactam. That shared ring is why they are grouped as beta-lactam antibiotics.

2. Protein synthesis. The bacterial ribosome is a 70S machine. It is built from a 30S part and a 50S part. The human ribosome is 80S, built from a 40S part and a 60S part. The sizes differ, so a drug can jam the bacterial machine and leave yours running. Aminoglycosides and tetracyclines hit the 30S part. Macrolides such as azithromycin and erythromycin hit the 50S part, and so does clindamycin. The match is not perfect, though. Your mitochondria carry ribosomes that look bacterial. That overlap helps explain some of the toxicity these drugs cause.

3. Nucleic acid synthesis. Some drugs block the enzymes bacteria use to copy and unwind DNA. The fluoroquinolones work this way. Ciprofloxacin and levofloxacin are the common ones. They shut down bacterial DNA gyrase and topoisomerase. Those enzymes are shaped differently from the human versions.

4. Metabolic (folate) pathways. Bacteria have to build their own folic acid. You eat yours. Sulfonamides and trimethoprim starve the bacterium of folate. They block two steps of that pathway, one after the other. It is a target you simply do not possess.

5. Cell membrane. A few drugs punch holes in the bacterial membrane. The contents of the cell then leak out. These drugs tend to be harsher, because your cells have membranes too. They are held back for stubborn infections. Polymyxins such as colistin attack the outer membrane of gram-negative rods. Daptomycin works the other way around. It wrecks the membrane of gram-positives such as MRSA and VRE, and it cannot touch a gram-negative at all.

Kill it or just stop it: cidal against static

Drugs also differ in how thoroughly they act. A bactericidal drug kills the bacterium outright. Penicillins do that, and so do aminoglycosides and fluoroquinolones. A bacteriostatic drug only halts growth. Tetracyclines, macrolides, and sulfonamides work that way. They hold the population still and leave the finishing blow to the immune system. In a healthy person, static is often enough. It is not always enough. Think of someone whose defenses are down, such as a person on chemotherapy with a low neutrophil count. Think of endocarditis or meningitis, where few immune cells reach the site. In those cases the team reaches for a bactericidal drug. There is no reliable immune backup to mop up the survivors.

TargetExample drug classesWhy it is selective
Cell wall synthesisPenicillins, cephalosporins, vancomycinHuman cells have no cell wall
Protein synthesis (ribosome)Aminoglycosides, tetracyclines, macrolidesBacterial ribosome (70S) differs from human (80S)
Nucleic acid synthesisFluoroquinolonesBacterial DNA enzymes differ from human ones
Folate metabolismSulfonamides, trimethoprimHumans get folate from diet; bacteria make it
Cell membranePolymyxins, daptomycinLeast selective — reserved for resistant cases
A penicillin allergy is a target clue, not just a flag on the chart. Penicillins and cephalosporins share the beta-lactam ring. So a true, severe penicillin allergy may cross over to some cephalosporins. Always ask what actually happened. A rash in childhood is a very different thing from a throat closing. Mislabeling matters, because a vague allergy pushes people onto broader, harsher, more resistance-prone drugs for no good reason.
Interactive Send a drug at each of the five targets on a live cell, watch the wall, ribosome, DNA, folate and membrane fail, and read how selective each hit is Open full ↑
Key points
  • Antibacterials hit five targets. They are the cell wall, the ribosome, nucleic acids, folate metabolism, and the cell membrane.
  • Beta-lactams attack the cell wall. That is the safest and most selective target. Penicillins and cephalosporins are the examples.
  • Bactericidal drugs kill. Bacteriostatic drugs stall growth and lean on the immune system to finish.
  • Someone with weak immune defenses usually needs a bactericidal drug.

Section 3Spectrum and choosing a drug

An Etest strip on an agar plate showing the minimum inhibitory concentration
Reference. An Etest strip: the point where the zone of inhibition meets the strip reveals the minimum inhibitory concentration (MIC). OpenStax Microbiology, CC BY 4.0 (via Wikimedia Commons)

Narrow against broad spectrum

A drug's spectrum of activity is the range of bacteria it works against. A narrow-spectrum drug hits only a few kinds. A broad-spectrum drug hits many kinds at once. Broad sounds better, and in a crisis it can save a life. Breadth still has a cost. A broad-spectrum antibiotic clear-cuts the normal flora along with the pathogen. That opens the door to a superinfection. Two common ones are Clostridioides difficile colitis and a yeast overgrowth. Every needless exposure also nudges the whole bacterial population toward resistance. So the aim, once the culprit is known, is the narrowest drug that will do the job.

Empiric first, then definitive

Cultures take time. A person with sepsis cannot wait a day or two for the result. So therapy usually happens in two stages. The first stage is empiric therapy, which is an educated guess. The guess rests on three things. Where the infection probably started. What the local resistance patterns look like. How sick the person is right now. The team starts a broad-spectrum drug at once, but only after cultures are drawn. Then the lab reports what grew and what it is susceptible to. Now the team switches to definitive therapy. Ideally that means narrowing down to a focused drug, a move called de-escalation. This is why the order of events at the bedside matters so much. Cultures first. Antibiotics second.

Susceptibility testing: proving the drug will work

How does the lab know which drug to recommend? It tests the isolate from that one person against a panel of antibiotics. The key number is the minimum inhibitory concentration (MIC). That is the lowest drug concentration that stops the bacterium from growing. Several methods get at it. The classic one is the Kirby–Bauer test, also called disk diffusion. Paper disks soaked in different antibiotics sit on a lawn of bacteria. Each drug spreads out into the agar. A clear ring called the zone of inhibition forms where growth was stopped. The bigger the zone, the more susceptible the organism. Note what disk diffusion does and does not give you. It sorts the isolate into susceptible, intermediate, or resistant. It does not read out an exact MIC. The Etest strip in the figure sharpens this into a real MIC value. Automated broth microdilution trays do the same job in tiny wells. Either way the result reaches the chart as a letter. S means susceptible. I means intermediate. R means resistant. That report is worth reading closely whenever someone is not improving on the current drug.

Interactive Run a real susceptibility workup on five isolates: measure the zones on a Kirby–Bauer plate, read an Etest strip and a microdilution tray, and sign out each drug as S, I, or R Open full ↑
 Narrow-spectrumBroad-spectrum
Bacteria coveredFew, targetedMany
Effect on normal floraSpares most of itWipes out much of it
Superinfection riskLowerHigher (C. diff, yeast)
Resistance pressureLowerHigher
Best used whenThe pathogen is knownEmpirically, while awaiting cultures
Cultures before the first dose. Once antibiotics are on board they can sterilize a blood or wound sample within hours. A falsely negative culture then leaves the team guessing for the rest of the stay. So if antibiotics are about to start, make sure the ordered cultures are collected first. It is one of the highest-value habits in infection care, and it costs nothing but attention.
Interactive Pick a drug from narrow to very broad and watch what its spectrum kills: the infection against the protective normal flora, with the C. diff risk tracked live Open full ↑
Key points
  • Spectrum is the range of bacteria a drug covers. Narrow is preferred once the pathogen is known.
  • Broad-spectrum drugs invite superinfection and resistance. Use them empirically, then narrow down.
  • Empiric therapy is the first guess. Definitive therapy follows the culture and de-escalates.
  • The MIC is the lowest concentration that stops growth. Results are reported as S / I / R.

Section 4How bacteria fight back

Diagram of the mechanisms bacteria use to resist antimicrobial drugs
Reference. The main mechanisms of antibiotic resistance — from destroying the drug to pumping it back out. OpenStax Microbiology, CC BY 4.0 (via Wikimedia Commons)

Four ways to survive the drug

Resistance is not the drug wearing off. It is evolution in fast forward. The drug kills the susceptible bacteria. It leaves the rare survivor that happened to carry a defense. That survivor's offspring inherit the trick, and soon they are the whole population. There are four main defenses, and the figure lays them out.

Destroy the drug. The famous example is beta-lactamase. It is an enzyme that snips open the beta-lactam ring before the drug can act. Penicillinase in Staphylococcus aureus was the first one found. Gram-negative rods have taken the idea further. ESBLs chew through the cephalosporins, and carbapenemases such as KPC chew through the carbapenems. This is also why some penicillins come paired with a beta-lactamase inhibitor. Amoxicillin–clavulanate is one such pair. The inhibitor soaks up the enzyme so the antibiotic survives.

Change the target. If the drug can no longer recognize its binding site, it cannot act. Change the lock and the key stops working. This is the trick behind MRSA. The bacterium picks up a gene for an altered penicillin-binding protein that beta-lactams cannot grip. VRE does the same thing to vancomycin. It swaps the end of its wall building block, so the drug has nothing to clamp onto.

Pump the drug out. Efflux pumps sit in the membrane. They bail the antibiotic back out before it reaches a lethal level inside the cell. Some pumps move several unrelated drug classes, so one pump can cause broad resistance. Tetracycline resistance often works this way.

Keep the drug out. A gram-negative cell gates its outer membrane with channels called porins. Narrow those channels, or lose them, and less drug gets in at all. Paired with a pump, the level inside never gets high enough to kill.

How resistance spreads, and why it spreads so fast

Resistance can start with a plain mutation. Its frightening speed comes from somewhere else. It comes from horizontal gene transfer. Bacteria hand resistance genes to one another, even across species. The genes travel on mobile loops of DNA called plasmids. One plasmid can carry resistance to several drug classes at once. So a single exposure can select for a strain resistant to drugs it never even met. Every needless antibiotic adds to the selective pressure that favors these survivors. That is true in a clinic, on a farm, and in a fish tank.

The named threats: MRSA and friends

MRSA stands for methicillin-resistant Staphylococcus aureus. It resists essentially every beta-lactam antibiotic. That knocks out the safest and most familiar drugs on the shelf. The team is pushed toward vancomycin and its relatives instead. MRSA spreads readily in hospitals and in the community. So people known to carry it are often placed on contact precautions. It does not travel alone. VRE means vancomycin-resistant enterococci. ESBL-producing and carbapenem-resistant gram-negatives sit on the same list. So does multidrug-resistant tuberculosis. The common thread is simple and grim. Our shelf of reliable drugs is shrinking faster than we are refilling it.

MechanismWhat the bacterium doesExample
Drug inactivationMakes an enzyme that destroys the drugBeta-lactamase vs penicillins
Target modificationAlters the drug's binding siteMRSA's altered binding protein
Efflux pumpPumps the drug back outTetracycline resistance
Reduced uptakeKeeps the drug from enteringAltered porins in gram-negatives
Contact precautions protect the whole unit, not just one room. A gown and gloves for a wound that looks fine can feel like a nuisance. Then remember where the organism goes next. It rides on hands and bed rails to the person in the next bed, who may be far more fragile. Steady precautions and hand hygiene are how one person's resistant organism stays one person's problem.
Interactive Give each defense to a live cell and send in six drugs: see the enzyme cut, the pump bail, the changed lock, and the closed porin stop the drug Open full ↑
Key points
  • Bacteria resist drugs in four ways. They destroy the drug, change the target, pump it out, or keep it out.
  • Resistance genes spread fast by horizontal gene transfer on plasmids, driven by selective pressure.
  • MRSA resists all beta-lactams by changing the drug's binding site. That forces a switch to vancomycin.
  • Contact precautions and hand hygiene hold resistant organisms in place on a unit.

Section 5Stewardship: using the drugs well

Diagram showing how antibiotic use applies selective pressure that favors resistant bacteria
Reference. Antibiotic exposure applies selective pressure — it kills the susceptible and leaves the resistant to multiply. OpenStax Microbiology, CC BY 4.0 (via Wikimedia Commons)

What stewardship means

Antibiotic stewardship is the shared effort to use these drugs only when they help, and to use them well. It is often boiled down to the five rights of antimicrobials. The right drug. The right dose. The right route. The right duration. The right person. The purpose runs two ways. One aim is a better outcome for the person in front of you, with fewer side effects, less C. diff, and a shorter stay. The other aim is to protect the drugs themselves for the people who come after. Resistance is a shared resource being spent. So stewardship is a public-health duty, not just a way to hold down costs.

Stewardship at the bedside

Stewardship gets described as work for doctors and pharmacists. In truth it is touched at nearly every point by whoever is at the bedside. That person draws cultures before the first dose. That person gives antibiotics on time, so blood levels stay effective. That person watches for improvement and for toxicity. And that person is placed to ask the questions that trim needless drug use. Can this IV antibiotic switch to a pill, now that the person is eating and getting better? Is this still needed on day five, or is it just still ordered? Are two drugs covering the same bug? One more job belongs here too. It is the last check on the allergy history. Clearing up a vague penicillin allergy keeps someone off a broader, harsher drug for no reason.

Adherence and what you teach

Stewardship reaches past the hospital door. Out there, teaching is the tool. Explain that antibiotics do nothing for colds, flu, and most sore throats. Asking for them just in case carries real risk and no benefit. Teach three habits. Take the drug exactly as prescribed. Never save or share leftover antibiotics. Never use someone else's. The old blanket rule to always finish every pill is being refined, because some infections do better on a shorter course. So the honest, durable message is simpler and stronger. Take it the way it was prescribed. Call before stopping early or doubling up.

Stewardship goalWhat that looks like in practice
Right diagnosisCollect cultures before the first antibiotic dose
Right timingGive doses on schedule to keep levels effective
Right durationPrompt the team to review or de-escalate ongoing orders
Right routeFlag when a stable, eating person could switch IV → oral
Right personVerify and clarify the allergy history
PreventionHand hygiene, timely device removal, teaching
“Is this antibiotic still needed?” is always worth asking out loud. An order placed on day one has a way of quietly running for a week, because nobody revisited it. Raise the day of therapy at rounds. Or simply ask whether the IV can become a pill. That one question prevents extra exposure, superinfection, and resistance, and it needs no new technology at all. Curiosity, said out loud, is a stewardship intervention.
Interactive Set all five rights for a real case, run the course day by day, and watch the infection clear or leave resistant survivors behind Open full ↑
Key points
  • Stewardship means the right drug, dose, route, duration, and person. It serves the person now and the people later.
  • At the bedside that means cultures first, doses on time, and a close watch for toxicity.
  • Speak up to de-escalate, to switch IV to oral, and to clarify allergies.
  • Teach adherence. Take as prescribed, never share or save antibiotics, and expect nothing from them for a viral illness.

The chapter in one breath

  • Selective toxicity means striking a target only the microbe owns. It is why antimicrobials cure without poisoning the host.
  • The therapeutic index is the safety margin. Narrow-index drugs need blood-level monitoring, and that means vancomycin and the aminoglycosides.
  • Antibacterials hit five targets. They are the cell wall, the ribosome, nucleic acids, folate metabolism, and the cell membrane.
  • Drugs are bactericidal or bacteriostatic. They are also narrow- or broad-spectrum. Narrow and cidal both have their place, and so does empiric breadth.
  • Susceptibility testing finds the MIC. Kirby–Bauer, the Etest, and broth microdilution all do it. The report comes back as S / I / R and guides definitive therapy, after cultures are drawn.
  • Bacteria resist by destroying, dodging, ejecting, or excluding the drug. Resistance then spreads fast on plasmids. MRSA is the headline example.
  • Stewardship protects the person and the drugs at the same time. Cultures first. Doses on time. De-escalation argued for. Adherence taught.

ReferenceWords worth knowing

A quick reference for the terms in this chapter. Skim it now, or circle back whenever a word trips you up.

Adherence
Taking a medication exactly as prescribed, with the right dose, timing, and duration.
Antibiotic stewardship
The shared effort to use antimicrobials only when needed and to use them well, protecting both the person treated and the drug's future usefulness.
Bactericidal
Describes a drug that kills bacteria outright.
Bacteriostatic
Describes a drug that halts bacterial growth and leaves the immune system to finish.
Beta-lactam
The chemical ring shared by penicillins and cephalosporins. It is the part a beta-lactamase attacks.
Beta-lactamase
A bacterial enzyme that destroys beta-lactam antibiotics. A common resistance mechanism.
Broad-spectrum
Active against many kinds of bacteria. Handy empirically, but harder on the normal flora.
De-escalation
Narrowing therapy from a broad drug to a focused one once cultures name the pathogen.
Efflux pump
A membrane transporter that pumps an antibiotic back out of the cell before it can act.
Empiric therapy
Best-guess antibiotic treatment started before culture results are back.
Horizontal gene transfer
The passing of genes, resistance genes included, between bacteria, often on plasmids.
Kirby–Bauer test
A disk-diffusion susceptibility test. The size of the zone of inhibition reflects susceptibility.
Minimum inhibitory concentration (MIC)
The lowest drug concentration that prevents visible bacterial growth.
MRSA
Methicillin-resistant Staphylococcus aureus. It resists all beta-lactams through an altered binding protein.
Narrow-spectrum
Active against only a few kinds of bacteria. Preferred once the pathogen is known.
Selective toxicity
Harming the microbe far more than the host, by aiming at a structure the microbe has and the host lacks.
Spectrum of activity
The range of bacterial types a given antimicrobial can affect.
Superinfection
A new infection that follows a drug's disruption of the normal flora, such as C. diff or yeast.
Susceptibility testing
Lab testing of one person's isolate against antibiotics, reported as S, I, or R.
Therapeutic index
The safety margin between a drug's effective dose and its toxic dose.
Trough level
The drug concentration measured just before the next dose, used to avoid toxic build-up.
Zone of inhibition
The clear ring of stopped growth around an antibiotic disk on a culture plate.

Check yourself

1. Explain selective toxicity. Then give one bacterial structure that makes it possible.
Selective toxicity means harming the microbe far more than the host, by aiming at something the microbe has and the host does not. The peptidoglycan cell wall is the classic example. Human cells have no wall, so cell-wall drugs kill bacteria without injuring the person.
2. What is the therapeutic index? Why do vancomycin and the aminoglycosides need blood-level monitoring?
The therapeutic index is the gap between the effective dose and the toxic dose. Vancomycin and the aminoglycosides have a narrow index, so the helpful and harmful doses sit close together. Levels such as a trough are drawn to keep the drug inside the window and off the kidney and inner ear.
3. A vancomycin trough is ordered. When should it be drawn, and why does the timing matter?
Right before the next scheduled dose. A trough drawn early, or after the dose has run, gives a false value. The next dose is then set from bad data, which risks under-treatment or kidney injury. For a narrow-index drug, timing is part of the therapy.
4. Name the five bacterial targets antibacterial drugs attack, with one drug class for each.
Cell wall (penicillins, cephalosporins, vancomycin), protein synthesis at the ribosome (aminoglycosides, tetracyclines, macrolides), nucleic acid synthesis (fluoroquinolones), folate metabolism (sulfonamides, trimethoprim), and cell membrane (polymyxins, daptomycin). Cell-wall drugs are the most selective, because humans have no wall.
5. Tell bactericidal from bacteriostatic. Which is generally preferred when immune defenses are weak?
Bactericidal drugs kill bacteria. Bacteriostatic drugs only stop their growth and rely on the immune system to finish. Weak defenses call for a bactericidal drug. Think of a low neutrophil count, or of meningitis and endocarditis, where no dependable immune backup arrives.
6. Why can someone with a severe penicillin allergy sometimes react to a cephalosporin?
Penicillins and cephalosporins share the beta-lactam ring, so an immune response to one can cross-react with the other. That is why the actual reaction is worth checking. A mild rash is very different from anaphylaxis, and the answer changes which drug gets chosen.
7. Compare narrow- and broad-spectrum antibiotics. Name two downsides of broad-spectrum use.
Narrow-spectrum drugs hit few bacteria. Broad-spectrum drugs hit many. Two downsides: they disrupt the normal flora and invite superinfection such as C. diff or yeast, and they apply more selective pressure for resistance. Broad is best used empirically, then narrowed.
8. Tell empiric therapy from definitive therapy. What must happen before the first dose?
Empiric therapy is the educated first guess, started before results. Definitive therapy is the focused drug chosen once cultures name the pathogen and its susceptibilities. Cultures must be drawn before the first antibiotic dose, or the drug can sterilize the sample and hide the culprit.
9. What does the MIC tell you? What do S, I, and R mean on a susceptibility report?
The MIC is the lowest drug concentration that stops the organism from growing. On the report, S means susceptible and the drug should work, I means intermediate, and R means resistant, so the drug is not a reliable choice.
10. List the four main ways bacteria resist antibiotics. Which one does MRSA use?
Destroy the drug, as beta-lactamase does. Change the target. Pump the drug out by efflux. Keep the drug out by reduced uptake. MRSA uses target modification. It makes an altered penicillin-binding protein that beta-lactams can no longer grip, which is why it resists all beta-lactams.
11. Why does antibiotic resistance spread so quickly between bacteria?
Because of horizontal gene transfer. Bacteria share resistance genes, even across species, on mobile plasmids, and one plasmid can carry resistance to several drugs at once. Every needless antibiotic adds selective pressure that favors the resistant survivors.
12. Give three concrete bedside actions that count as antibiotic stewardship.
Any three of these: draw cultures before the first dose; give doses on time to keep levels effective; speak up to de-escalate or switch IV to oral; clarify the allergy history; teach people to take antibiotics as prescribed and never to share or save them. Each one trims needless exposure and protects the person and the drug alike.